Chapter 3: FRU Removal and Replacement Procedures
Replacing Node Memory Modules
Quantum DXi6900-S Field Service Manual
87
3. Click
Generate Report
.
Click
OK
to continue. The system generates a new DSET report. This can take several minutes.
4. To download the newly generated DSET report, click
Download Report
.
5. Decompress the DSET report and open the DSET report interface file
dsetreport.hta
.
Note:
When prompted, enter the password “dell” (no quotes, all lowercase letters).
6. Navigate to
System > Main Chassis > Memory
).
Figure 57:
Identifying a Failed Memory Module
7. Check the DSET report entries for DIMM sockets A1–A8 and B1–B8 to locate the failed DIMM.
Removing a Failed Memory Module from the Node
To remove the failed memory module from the DXi6900-S Node:
WARNING:
The memory modules are hot to the touch for some time after the system has been
powered down. Allow time for the memory modules to cool before handling them.
Turning Off the DXi6900-S on page 21
).
Opening and Closing the Node on page 63
).
3. Locate the failed memory module.
4. Press down and out on the ejectors on each end of the socket until the memory module pops out of the
).
