Chapter 3: FRU Removal and Replacement Procedures
Additional Removal and Replacement Procedures
Quantum DXi6900-S Field Service Manual
180
Removing and Installing the Information Tag
To remove and replace the information tag, refer to the following procedures:
Note:
You must remove the information tag from both the failed Node chassis and the replacement
Node chassis.
l
Removing the Information Tag below
l
Replacing the Information Tag on page 182
Removing the Information Tag
To remove the information tag:
1. Using a #2 Phillips screwdriver, remove the screws securing the control panel to the chassis (see
).
Caution:
Do not use excessive force when removing the control panel as it can damage the
connectors.
2. From inside the system, push the front panel out of the chassis.
3. Remove all the cables connecting the control panel to the chassis.