Chapter 1: Basic Operations
Accessing Remote Management
Quantum DXi6900-S Field Service Manual
21
Figure 14:
Powering on the DXi6900-S Node
1
1. Power Switch
Turning Off the DXi6900-S
Before shutting down the DXi6900-S, make sure that all backup and replication jobs are finished, and that
space reclamation activity is complete.
1. Shut down the system from the remote management console using the
Shutdown
option on the
Utilities > Reboot & Shutdown
page.
Note:
Shutting down the system can take up to 15 minutes. Only the Node will completely shut
down.
2. After the Node shuts down, turn off both power switches on the back of each Array module (RBOD).
Wait until the seven segment display on the rear of the module turns off.
3. Turn off both power switches on the back of each Expansion module (EBOD).
Accessing Remote Management
Access the remote management console using a Web browser on a workstation that is on the same network
as the DXi6900-S.
Supported Browsers
Web browser software is not included with the DXi6900-S. You must obtain and install it separately. The
DXi6900-S remote management console supports the following Web browsers:
l
Mozilla Firefox 36 or later
l
Google Chrome 40 or later
l
Microsoft Internet Explorer 10 with SSL 3.0 disabled (enabled by default) and higher.
