Quantum DXi6900-S Скачать руководство пользователя страница 48

Страница: 48 / 208

Chapter 2: Service Menus

Accessing the DXi6900-S Service Menu

Quantum DXi6900-S Field Service Manual

Option

Description

Clear RAID sets on H730

Deletes the internal (non-boot) RAID sets. (The boot RAID can only be re-
created with the RAID CD.)

Create RAID sets on H730

Creates the internal (non-boot) RAID sets. These are the RAID sets that
store the SNFS metadata.

Show Encryption Status

Displays the current Data-at-Rest Encryption status for all RAID controllers.

Setup External Storage

Use the

Setup Array Menu

to configure the DXi6900-S Array modules (RBODs) and Expansion modules

(EBODs).

To access the

Setup Array Menu

from the

Hardware Configuration Menu

1. Type the option for

Setup external Storage

and press

<Enter>

The

Setup Array Menu

displays (see

Figure 25 below

Figure 25:

Setup Array Menu

0) Save Array configurations

- Save all Array configs before modifications.

1) Rescan for Arrays

- Rescan the system for connected arrays.

2) Locate an Array

- Locate an RBOD in the system.

3) Add an Array

- Add an RBOD to the system.

4) Add an EBOD to an Array

- Add an EBOD to an existing Array.

5) Upgrade Array Firmware

>>> - Download new Array Controller Firmware or NVSRAM.

6) Display Array BBU status

- Display the status and age of the array BBU.

7) Reset Array BBU date

- Reset the day counter for a replaced array BBU.

8) Re-enable Array tray alarms - Re-enable tray alarms on all arrays.
9) Show Premium Feature Info

- Show all installed PFK licenses.

10) Upload Turbo PFK file

- Install Turbo Premium Feature license.

11) Show Data Assurance Status - Show if LUNs use DA or not.
12) Show Encryption Status

- Show if LUNs are encrypted or not.

13) Discover and Name Arrays

- Auto discover SAS attached arrays.

14) Reset Tray(s)

- Allows new Volumes to show up for in-band.

15) Show Trays Health Status

- Show Health Status for all Trays.

16) Show Trays Info

- Show Serial Numbers, Volumes, PFKs of all Trays.

17) Show Tray Pools/Volumes

- Show RBOD Pool(s) and Volume(s).

18) Manufacturing

>>> - Tools for Manufacturing.

The

Service Setup Array Menu

includes the following options:

Содержание DXi6900-S

















































































































































































































Результаты поиска

Содержание DXi6900-S

Отзывы:

Похожие инструкции для DXi6900-S

Бренды по названию

Популярные бренды

Quantum DXi6900-S, Руководство по обслуживанию на месте

Результаты поиска

Содержание DXi6900-S

Отзывы:

Похожие инструкции для DXi6900-S

Бренды по названию

Популярные бренды