OPTIMedical OPTI CCA-TS, Руководство оператора, Страница: 80 / 271

Operator’s Manual – OPTI CCA-TS 4-9
4 CALIBRATION AND QUALITY CONTROL
3. Enter your Operator ID, or 4-digit PIN using the
alphanumeric keypad (Fig. 4-14).
To bypass this function, press
.
NOTE: If Operator ID is configured as “required”
in Setup, you cannot go to the next step until
a number is entered.
NOTE: If Secure Op. IDs is activated under Setup,
you will be prompted for your 4-digit PIN #
instead of your Op. ID.
NOTE: Bar-coded Operator IDs may be entered
using the bar code scanner.
4. Select the desired level (Fig. 4-15) and press
.
5. Press if the lot number is correct
(Fig. 4-16).
NOTE: If a new lot number of QC material is
entered, make sure the ranges have been
entered into the system prior to running a
sample. (See Chapter 3, Customization).
If the password function is enabled, you will
be asked for it before deleting the database
for the old lot number.
Fig. 4-15 Select QC Level
Fig. 4-14 Enter Operator ID
Fig. 4-16 Confirm Lot Number