OPTIMedical OPTI CCA-TS Скачать руководство пользователя страница 64

Страница: 64 / 271

3-24

Operator’s Manual – OPTI CCA-TS

3 CUSTOMIZATION

Fig. 3-41 Interface

Your OPTI CCA-TS has an RS232 standard serial

interface with a baud rate fixed at 9600 and an

Ethernet port. These ports may be configured for

ASCII and ASTM output.

1. From the

<Ready>

display, select

<System Manager>

and

<Setup>

2. In the

<System Setup>

menu, press the

<Miscellaneous>

tab and then

<Hardware>

3. In the

<Interface>

screen (Fig. 3-41), you can

select

<External Barcode Enable>

4. Select the communication

<Format>

<ASCII>

<ASTM>

, or

<CF>

•

<ASCII>

- Data in easy

to read OPTI Medical

custom format. The OPTI CCA-TS exports data

string identical to the internal printer output.

•

<ASTM>

- Complies with ASTM standard.

Please refer to OPTI CCA-TS interface

specifications for more information.

•

<CF>

- Compact Flash is used for archiving

data to a Compact Flash Card. An Export Kit is

available (BP7140) with a properly formatted

card, instructions and card reader. The database

can be exported to the Compact Flash card in

CSV format and then read by a PC.

Select

<Comma>

<Semicolon>

for your

CSV file delimiter in MS Excel.

•

<Link>

- Select

<Serial>

<Ethernet>

5. The

<Ethernet>

screen (Fig. 3-42) is used to

configure Ethernet settings:

<Format>

<IP

Type>

<IP Address>

<Subnet Mask>

<UDP Port>

<TCP Port>

, and

<Host IP>

NOTE: The analyzer must be connected to an active

network to activate this menu.

3.3.3.5 Setting Up Communications

3.3.3.5.1 Configuring the Communication Format

Fig. 3-42 Ethernet Settings

Содержание OPTI CCA-TS
















































































































































































































































































Результаты поиска

Содержание OPTI CCA-TS

Отзывы:

OPTIMedical OPTI CCA-TS, Руководство оператора, Страница: 64 / 271

Результаты поиска

Содержание OPTI CCA-TS

Отзывы: