OPTIMedical OPTI CCA-TS Скачать руководство пользователя страница 235

Страница: 235 / 271

When OPTI CCA-TS software is updated, Release Notes are provided.

Steps

1. Click on Resources menu.
2. Select Software Tab

3. Click an OPTI CCA-TS software link to download a file.

4. Unzip and extract C

ompact Flash Files

to a Compact Flash Card.

To download the current instrument software and current release notes, please visit the OPTI

Medical Website

www.optimedical.com

OPTI CCA-TS Software Update Procedure

Please Insert Software Release Notes in this section.

Necessary Supplies

1 - Software update kit

-contains 1 compact Flash (CF) Card and Instructions

Procedure

1. Print the configuration report to obtain a printed copy of the instrument Setup. This report

is located in the

Data Manage

r menu.

Warning

: All instrument settings, patient data and QC data will be deleted

from the system during the update. if your data needs to be exported please do so

prior to performing the update.

2. Turn the analyzer

OFF

3. Locate the CF card slot on the back of the instrument.

4. Insert the CF card with the label facing up and the arrow pointing in.

5. Turn analyzer power

6. Wait for analyzer to load the software.

7. The update is complete once the memory error is displayed.

Unzipping

To unzip files, use the Extract button on the toolbar or select Extract from the Actions menu

to display the Extract Window. Use the Extract window to extract or “unzip” files from the

open archive to your disk.

SOFTWARE UPGRADES

Operator’s Manual - OPTI CCA-TS

SW-1

Содержание OPTI CCA-TS
















































































































































































































































































Результаты поиска

Содержание OPTI CCA-TS

Отзывы:

OPTIMedical OPTI CCA-TS, Руководство оператора, Страница: 235 / 271

Результаты поиска

Содержание OPTI CCA-TS

Отзывы: