OPTIMedical OPTI CCA-TS, Руководство оператора, Страница: 58 / 271

3-18 Operator’s Manual – OPTI CCA-TS
3 CUSTOMIZATION
3.3.3.1.2 Selecting QC Lockout
This menu allows the facility to ‘lock out’ operators
unless some form of QC has been run. OPTI Medical
recommends option 1 and option 3 as described below.
Each facility should develop their own policies on
the frequency and type of QC based on the regulatory
requirements. The instrument is factory-set with lock-
out options turned off.
To activate these options:
• Select <QC Lockout> in the <Security> menu
(Fig. 3-35).
Option 1:
<SRC Lockout Enable> - Under this option you
can require that one, two or three levels of SRCs must
be run at regular intervals. If the selected number of
SRCs is not run, patient measurements will not be
allowed.
<8hr> - Requires SRCs to be run every 8 hours.
<12hr> - Requires SRCs to be run every 12 hours.
<24hr>
- Requires SRCs to be run every 24 hours.
<7dy> - Requires SRCs to be run every 7 days.
1. Select the desired option.
2. Press to accept the changes.
3. Press to return to the
<Setup>
screen or
to return to <Ready> .
NOTE: The selected time interval starts with the time
this feature is activated.
Option 2:
<Control Lockout Enable> - Under this option
you can require that one, two or three levels of liquid
controls must be run at regular intervals.
If the selected number of controls is not run, patient
measurements will not be allowed.
<8hr> - Requires controls to be run every 8 hours.
<12hr> - Requires controls to be run every 12 hours.
<24hr> - Requires controls to be run every 24 hours.
<7dy> - Requires controls to be run every 7 days.
Fig. 3-35 Select QC Lockout