OPTIMedical OPTI CCA-TS Скачать руководство пользователя страница 5

Страница: 5 / 271

Important Information! Important Information!

This Operator´s Manual contains important warnings and safety information to be observed

by the user.
This instrument is only intended for one area of application which is described in the

instructions. The most important prerequisites for application, operation and safety are

explained to ensure smooth operation. No warranty or liability claims will be covered

if the instrument is applied in areas other than those described or if the necessary

prerequisites and safety measures are not observed.
The instrument is only to be operated by quali f ed personnel capable of observing these

prerequisites.
Only accessories and supplies either delivered by or approved by OPTI Medical Systems

are to be used with the instrument.
Due to this instrument’s operating principle, analytical accuracy not only depends on

correct operation and function, but also upon a variety of external inf uences beyond the

manufacturer’s control. Therefore, the test results from this instrument must be carefully

examined by an expert, before further measures are taken based on the analytical

results.
Treatment should never be administered based on results that are f agged on the

printout.
Instrument adjustment and maintenance with removed covers and connected power

mains are to be performed only by a qualif ed technician who is aware of the dangers

involved.
Instrument repairs are to be performed only by the manufacturer or qualif ed service

personnel.

Important Information! Important Information!

Содержание OPTI CCA-TS
















































































































































































































































































Результаты поиска

Содержание OPTI CCA-TS

Отзывы:

OPTIMedical OPTI CCA-TS, Руководство оператора, Страница: 5 / 271

Результаты поиска

Содержание OPTI CCA-TS

Отзывы: