OPTIMedical OPTI CCA-TS, Руководство оператора, Страница: 32 / 271

2-4 Operator’s Manual – OPTI CCA-TS
2 SETUP
• In the next screen, you may enter the current
day (Fig. 2-7).
• Press and enter the 4-digit year.
• After entering the current time and date
press
to save your settings.
5. Installing a New Gas Bottle
• This screen will appear after initial power-
up sequence, when no gas bottle is present
(Fig. 2-8).
• Press <New Gas Bottle> .
• Open the gas bottle by unscrewing the cap.
• Scan the new gas bottle bar code by holding
it 2-3 inches (5-8 cm) from the bar code
scanner located on the bottom right-hand
corner of the analyzer.
• The red line from the bar code scanner
should cover the entire bar code.
• The analyzer will beep when the bar code is
accepted.
• The bar code can be found on the gas bottle
instructional insert.
• Record the date of installation on the gas
bottle for later reference.
NOTE: To enter the bar code manually, press
<Manual> and enter the bar code
using the numeric keypad.
• Press when prompted to insert the
gas bottle.
Fig. 2-7 Enter Date
Fig. 2-8 Select New Gas Bottle
Scan Barcode for New Gas Bottle
Gas
Manual Cancel
Scan Barcode for New Gas Bottle
Gas
Manual Cancel
Please Insert Gas Bottle
Gas
OK Cancel
Please Insert Gas Bottle
Gas
OK Cancel