NSK MEGATORQUE M-ESB-YSB2020AB300, Руководство пользователя

Страница: 199 / 356

— 7-42 —
B B 3 3 t t y y p p e e B B 5 5 t t y y p p e e
7.2. For More Advanced Operation
7.2.1. Absolute Position Scale (For Absolute Position Sensor)
2 2 3 3 t t y y p p e e 2 2 5 5 t t y y p p e e
7.2.1.3. Offsetting Position Data
l
This System provides the position scale (user absolute position scale) along which every
positioning operation and setting of over travel limit shall be controlled. The user absolute
position scale is defined by offsetting position on the position scale that is unique to each Motor
(Motor absolute position scale) by use of the built in “one revolution absolute position sensor.”
Motor absolute position scale : Absolute Position Scale unique to the Motor defined by
its absolute position sensor.
User absolute position scale : Absolute position scale to control positioning and setting
over travel limit.
l
The AO data (AO command) sets the offset value.
l
The AO data will be automatically set when the home position is defined by the AZ command.
l
Relations between the Motor absolute position scale, the user absolute position scale and the AO
data shall be;
User absolute position data = Motor absolute position data – the AO data
[Example] AO data = 10 000 [pulse]
Figure 7-38
AO ＝ 10 000
10 000 0
User Absolute
Position Scale
Motor Absolute
Position Scale
409 600 819 199
0 399 600 819 199 809 199
7.2.1.4. Monitoring Position Data
l
The TP command reports the current position data.
Table 7-16
Motor Absolute Position data in pulse TP0 command
User Absolute Position data in pulse TP2 command
User Absolute Position data in 1/100° TP5 command
[Example] Monitor a position on the user absolute position scale in unit of 1/100°.
(1) Input the TP command.
:TP5/RP
12345
/ P 5
%
T R
ENT
P
(2) Press the BS key to turminate the monitoring.
:TP5/RP
12345
:_ BS