NSK MEGATORQUE M-ESB-YSB2020AB300, Руководство пользователя

Страница: 250 / 356

— 8-21 —
B B 3 3 t t y y p p e e B B 5 5 t t y y p p e e
2 2 3 3 t t y y p p e e 2 2 5 5 t t y y p p e e
8. Glossary of Command and Parameter
«
HD: Home Return Direction
Format : HD data
Data : 0, or 1
Shipping set : 1
Default : 0
l
Refer to “6.2.1.2. Setting Home Position by Home Return” for more details about the Home
Return.
HD0: Home Return in clockwise (CW).
HD1: Home Return in counterclockwise (CCW).
For ESBB5 and 25 type Driver Unit only
HI: Home In-position
Format : HI data
Data : 0 to 102 400 [pulse]
Shipping set : 0
Default : 0
l
The HI parameter specifies the range of home position where the HOME output signal closes if
the Home Return is in reporting mode for detection of the home position (HW
¹ 0).
l
The HOME output closes when the Motor is in the range set with the HI parameter centering the
user home position.
l
The TS or ?HI command reports the current setting.
«
HO: Home Offset
Format : HO data or /ST
Data range : – 802 816 to 802 816 [pulse]
Shipping set : 0
Default : 0
l
The HO parameter sets the distance to which the Motor advances from the position, at where the
detected position data becomes 0 for the first time after the input of limit switch (HLS: CN2) in
Home Return. Refer to “6.2.1.2. Setting Home Position by Home Return.”
l
Input of the HO data sets the offset (data) from the position at where the data of position sensor
becomes 0.
l
When the HO/ST command is inputted, the distance to the position 0 of position sensor from the
current position is set as the offset.
l
The TS or ?HO command reports the current setting.