Nidek Medical ICE-1000, Руководство оператора

Страница: 85 / 116

75
OPERATING PROCEDURES : Blocking
2
Align the projected, printed eye point for far
vision of the lens with the eye point mark for far
vision.
Confirm that the amount of tilting of the hori-
zontal reference line is within ±10° during the
alignment.
• Manual
Align the middle marking with the center of the
alignment scale.
Ensure that the markings are level.
6
Press the lens clamp button to fully tighten the lens.
7
Block the lens.
1) Press the Block button
.
Before pressing the button, confirm that the
lens cup is set in the cup holder.
2) The blocking arm moves to the front and
center, then downward to block the lens.
Keep your fingers away from the area between
the cup holder and lens.
3) The blocking arm returns to the original position.
• Prism prescription lenses cannot be blocked as the Single lens type. After marking the lens
using a lensmeter, set the lens type to Manual and block it.
• It is possible to set the time that the blocking arm descends with the Lens Holding Time
parameter.