Nidek Medical ICE-1000, Руководство оператора

Страница: 102 / 116

92
CONNECTION AND SETTINGS : Setting Parameters
9) Full eye minimum size: 25.0 to 35.0 mm
Factory setting: 30.0 mm
This parameter sets the minimum diameter of the lenses (when the standard cup is used)
that can be processed by a lens edger. Set any value from 25.0 to 35.0 mm (in increments of
0.1 mm) according to the lens edger.
10) Minimum edging H size: 15.0 to 30.0 mm
Factory setting: 22.0 mm
This parameter sets the minimum horizontal length of half-eye lenses that can be processed
by a lens edger. Set any value from 15.0 to 30.0 mm (in increments of 0.1 mm) according to
the lens edger.
11) Minimum edging V size: 15.0 to 30.0 mm
Factory setting: 20.0 mm
This parameter sets the minimum vertical length of half-eye lenses that can be processed by
a lens edger. Set any value from 15.0 to 30.0 mm (in increments of 0.1 mm) according to the
lens edger.
12) Groove Depth: 0 to 0.8 mm
Factory setting: 0.3
This parameter is for setting the default groove depth displayed when the Depth numeric
button is pressed.
Set any value from 0 to 0.8 mm (in increments of 0.1 mm).
13) Groove Width: 0.6 to 1.2 mm
Factory setting: 0.6
This parameter is for setting the default groove width displayed when the Width numeric but-
ton is pressed.
Set any value from 0.6 to 1.2 mm (in increments of 0.1 mm).
14) Drill Bit Diameter: 0.5 to 5.0 mm
Factory setting: 0.8
This parameter is for setting the default diameter of holes when the DIA numeric button is
pressed to use the hole position edit function.
Set the parameter in accordance with the diameter of the drill of the lens edger to obtain the
hole of the minimum diameter.
Set any value from 0.5 to 5.0 mm (in increments of 0.1 mm).
15) Flute Length: 1.0 to 10.0 mm
Factory setting: 6.0
This parameter is for setting the maximum hole depth when the hole position edit function is
used.
Set the parameter in accordance with the length of the drill of the lens edger.
Set any value from 1.0 to 10.0 mm (in increments of 0.1 mm).