Nidek Medical ICE-1000, Руководство оператора

Страница: 56 / 116

46
OPERATING PROCEDURES : Setting Processing Conditions and Entering Layout Data
When the cup mark changes into the oblate ellipse, block the lens with a lens cup for half-eye lens.
Set the cup mark size with the corresponding parameter(s) depending to the lens edger.
See “4.1 Setting Parameters” (Page 89) for the setting method.
Minimum lens diameter for processing with the lens edger
Minimum lens diameter for processing with the ME-1000
• When the Cup Mode parameter is set to
Pliable, Mini, or Nano, the displayed
cup mark is constant in size. In addition,
the settings of the Full eye Minimum
Size, Grind Minimum Size (H), and
Grind Minimum Size (Y) parameters
become disabled
See “4.1 Setting Parameters” (Page 89)
for the parameter setting procedure.
Minimum lens size with a stan-
dard lens cup (hard cup)
Minimum lens size with a lens cup
(hard cup) for half-eye lens
Minimum vertical length for lens
to be processed
Minimum lens diameter
(Full eye minimum size)
Minimum horizontal length for
lens to be processed
Lens edger
Minimum lens diameter
for the lens cup (hard
cup)
Minimum horizontal
length for lens to be
processed
Minimum vertical
length for lens to be
processed
LE-9000 (Flat edging)
ø
28 mm
ø
21 mm
ø
19 mm
LE-9000 (Beveling) ø
30 mm
ø
22 mm
ø
20 mm
SE-9090
ø
29 mm
ø
26 mm
ø
23 mm
Processing type
Minimum horizontal
length for lens to be
processed
Minimum vertical
length for lens to be
processed
Circumference processing
Grooving
Flat edging
ø
32 mm
ø
19 mm
Beveling ø
33 mm
ø
20 mm