Nidek Medical ICE-1000, Руководство оператора

Страница: 22 / 116

12
BEFORE USE : Display
Magnification
Displays magnification of the displayed image and pressing here switches the magnification between ×1
(actual size) and ×2.
Right/Left indication
This shows the left-eye or right-eye lens (Right/Left).
Under this button, a minimum lens diameter is displayed.
Cup holder
This mark indicates the cup holder's position. Arrange the lens so that this mark is inside the Lens clamp
pin range.
Cup mark
Indicates the outer shape of the lens cup to be blocked.
Set the cup mode on the Parameter 2 screen depending on the specifications of the lens edger used. The
parameter has three options: STD (Standard), Pliable, Mini, and Nano.
When STD is selected, set the outer dimensions of the lens cup respectively for the standard lens cup (hard cup)
and the cup (hard cup) for half-eye lens. The shape of the lens cup for half-eye lens changes to an oblate ellipse
depending on the lens shape size and lens layout data.
Optical center mark
This indicates the position of the optical center
of the lens, and cylinder axis angle.
When the optical center is not detected or it is
not inside the blocking area, the mark is
displayed in red. At this time, blocking is not
available.
Right/Left indication
Cup holder
Cup mark
Optical center mark
Lens clamp pin area
Lens clamp indication
Frame change
Narrow/Normal
In the case of the frame center
(The center is indicated by
ǫ
.)
In the case of the optical center
(The center is indicated by
Dz
.)