Nidek Medical ICE-1000, Руководство оператора

Страница: 62 / 116

52
OPERATING PROCEDURES : Setting Processing Conditions and Entering Layout Data
2.5.5 Entering layout data for Manual-type lenses
When the lens type is set to Manual (EX lenses or prism lenses etc.), mark the lens using a lensmeter
in accordance with prescription. Then manually align the lens using the marking on the lens and block
the lens.
The method of entering lens layout data is the same as
that for the single vision lenses.
See “2.5.2 Entering layout data for single vision lenses”
(Page 41).
O Setting WD
The WD represents the distance between the
longest vertical lines in the middle on the left
and right. Set the WD value depending on the
space between the markings on the lens.
It is also possible to set the WD just before
placing the lens on the lens table and block-
ing the lens.
The WD is set on the blocking screen.
×Ä