63
OPERATING PROCEDURES
:
Drilling Settings
2
Specifying R or L starts measurement.
It takes about 20 seconds for measurement. “Detecting...” is displayed during measurement.
Wait for a while without touching the instrument.
7
When the measurement is complete, the
detected outline and frame center (cross) are
displayed in white on the screen.
8
Select the desired hole type among the add
hole buttons and specify the hole position with
the touch pen.
A red circle (or symbol corresponding to the
hole type) is displayed in the specified posi-
tion.
Rough positioning is acceptable because it
will be precisely aligned later.
For slotted and rectangular holes, specify the
start point of the hole and drag to the end
point.
Pressing and dragging across the screen
moves the circle (or symbol).
Press the Delete hole button
to delete the circle (or symbol) displayed in red.
9
After specifying the hole position, press the
OK button.
The status changes from the hole position
addition to the hole position precise setting.
Hole number 1 and its surroundings are
enlarged.
Add hole buttons
Содержание ICE-1000
Страница 1: ...INTELLIGENT BLOCKER Model ICE 1000 OPERATOR S MANUAL...
Страница 8: ...VI...
Страница 114: ...104 SPECIFICATIONS AND ACCESSORIES Standard Configuration 5 3 2 Optional accessories Barcode scanner RS 232C cable...
Страница 116: ...106 INDEX...