Nidek Medical ICE-1000, Руководство оператора

Страница: 54 / 116

44
OPERATING PROCEDURES : Setting Processing Conditions and Entering Layout Data
The lens shape is enlarged or reduced laterally while
maintaining a similar form. At this time, the frame cen-
ter is regarded as the reference position.
For example to the right: Size = +5 mm:
5) Axis (Only when blocking single vision astigmatic lenses in ALM mode)
Enter the cylinder axis angle (Axis) independently for the left- and right-eye lenses.
Press the numeric button of Axis to display the numeric keypad. Enter any value and press the Ent
button.
The range of the Axis value is 0 to 180° in increment of 1°.
The cylinder reading polarity of the axis (mixed, +, or – reading) must match the prescription.
{ CYL reading mode
To change the setting, press the CYL mode
button to display the pop-up menu and select
the desired CYL mode.
When changing the CYL mode temporary
during blocking, press the CYL button.
The CYL button is displayed in red to show
that CYL reading mode is highlighted.
• This function allows one pattern to be used for several different-sized patterns.
• Changing the shape to a different form is also possible.
See “2.6 Shape Change Function” (Page 54) for details.
• Leave the Size value at 0.00 mm when tracing frames. The value is different from the size
compensation value of the lens edger.
Enlarged shape size
Original shape size
Original shape size + 5 mm
CYL mode button