Nidek Medical ICE-1000, Руководство оператора

Страница: 84 / 116

74
OPERATING PROCEDURES : Blocking
4
Press the lens clamp button to temporary
clamp the lens.
5
Align the lens.
Align the single vision lens so that the square frame indicating the blocking area changes
from red to green. When the mark is red and blinking, the lens can not be blocked.
For dual-tone colored lenses, be sure the correct side is facing up before blocking. Place the
lens so that the colored lines are horizontal.
When the lens type is one of the following, manual and exact alignment of the lens is needed.
• Progressive power lens (Progressive) with Semi auto mode
• Place the progressive power lenses on the lens table, keeping the amount of tilting of the
horizontal reference line (or markings on the laser marks) within ±10°.
If the amount of tilting exceeds ±10°, the eye point mark for far vision changes to red and blocking
becomes prohibited.
• Pressing the magnification display
double displays the screen.
The larger view simplifies the alignment
process.
Blocking is possible with the magnified
display.
• Pressing the brightness display changes
the camera image brightness.
Brightness display
Magnification display