Nidek Medical ICE-1000, Руководство оператора

Страница: 76 / 116

66
OPERATING PROCEDURES : Drilling Settings
Slotted hole
For other holes (simple hole, counterbored hole, Jewel holes 1 to 3), the hole center position
is specified.
• The coordinate specification method of the start and end points is selectable between
Center and Edge with the Slot coordinate mode parameter.
Start point coordinates
End point coordinates
Slotted hole width
(Hole diameter)
Start point coordinates
End point coordinates
Slotted hole width
(Hole diameter)
At the setting of Edge At the setting of Center
Pair holes Notched holes
• For pair or notched holes, setting the hole diameter and depth when the reference hole is
selected (displayed in red) applies the settings to the paired hole (or notch).
Change the paired hole (or notch) settings by selecting it (displayed in red) with the hole number.
• The coordinate specification method of notched holes is selectable between Center and
Edge with the Slot coordinate mode parameter.
T screw Rectangular hole
Distance between the holes
The reference is the center of the
hole nearer to the frame center.
Distance between the hole and
notch at the setting of Center
Notch width
(Hole diameter)
The notch is automatically
set to the shape edge.
The reference is
the hole center
position.
Rotation angle
Hole diameter
The groove width and length are
automatically set.
Start point coordinates
End point coor-
dinates
Rectangular hole
width
(Hole diameter)