Nidek Medical ICE-1000, Руководство оператора

Страница: 67 / 116

57
OPERATING PROCEDURES : Shape Change Function
2
3) Check the post-change shape on the screen.
6
After inputting is completed, press the Layout tab to return to the Layout screen.
The changed shape is not saved without pressing the Save button or blocking.
{ Hole positions after shape change
When lens shapes are changed, the set hole positions are changed under the following con-
ditions:
{ Buttons on the Shape Editor screen
• The cross in solid lines represents the frame center of the original shape data. Once the
shape is changed, it is updated but the frame center (cross) is not be updated.
The frame center is updated after the changed shape data is saved.
Horizontal direction
Calculates the pre-change H-edge hole positions and moves so that the
H-edge ratios are preserved.
Vertical direction
Fixes the position to the frame center determined before the change.
When the Shape Editor screen is displayed after the change, the
coordinates from the center moved by the change are displayed.
Step Increases or decreases with the +/- buttons.
Undo
Undoes the last change (undo function).
Up to three changes can be restored.
Redo
Restores the change by undo (redo function).
Undo operation can be canceled.
Clear Cancels all changes performed in shape change mode.
• Saving the shape data changed with the shape change function rewrites the original data.
At the same time, the shape data is recalculated and the circumference displayed on the screen is
rewritten.
• The layout data is not changed. However, only the FPD or DBL value is recalculated with
the new shape data and rewritten.
When the frames type is set to TwoPoint, the DBL value is fixed but the FPD one is recalculated.
For the other types of frames, the FPD value is fixed but the DBL one is recalculated.