Nidek Medical ICE-1000, Руководство оператора

Страница: 25 / 116

15
BEFORE USE : Display
1
Mirror button
Turns the mirror function on or off.
Turn the mirror function on to drill the holes symmetrically in the right and left lenses.
L button
Specifies the left lens.
Add hole buttons
Specify the type of the hole to be added.
Select the desired hole type. Press with the touch pen the position where the hole of the type selected is to be
added. A hole of the selected type is added in the pressed position on the screen.
The selected type holes can be added successively until the selected button is pressed again or another button is
pressed.
Delete hole button
Deletes the currently selected hole(s).
Shape outline/hole position button
Displays the lens outline and hole position detection screen.
Hole position coordinate buttons
There are six types of coordinate display methods according to the selection of the horizontal and vertical
reference positions.
The method can be selected according to each hole.
Horizontal reference position
Vertical reference position
Hole prevention area
Indicates the area in which hole positions cannot be set.
Holes cannot be specified within the displayed circle.
Undo/redo buttons
Undo the last change or restore the change by undo.
Hole No. indication
Displays the hole No. of the currently selected hole. The hole can be changed with the [<<] or [>>] button
next to the hole No. indication.
Center
The frame center is regarded as the reference position.
B-Edge
The temporal end or nasal end of the lens shape is regarded as the reference position.
H-Edge
The temporal edge or nasal edge that is right beside to the hole is regarded as the
reference position.
Center
The frame center is regarded as the reference position.
B-Edge
The lowest point of the lens shape is regarded as the reference position.