Nidek Medical ICE-1000, Руководство оператора

Страница: 37 / 116

27
OPERATING PROCEDURES : Operating Procedures
2
2.3 Operating Procedures
The following operating procedures are described in the method using the numeric keypad when
entering the JOB# and PTN#.
Selecting KEYPAD in the parameter JOB Code Input Interface or PTN Code Input Interface displays
the keyboard instead of the numeric keypad.
2.3.1 Operating the ICE-1000 in the Mini LAB system
In the Mini LAB system, the ICE-1000 manages data as a data server.
The ICE-1000 and the LEX-1000 comprise the system.
1
Turn the power switch ON ( ) to start the ICE-1000.
See “2.2 Start-up” (Page 26) for the ICE-1000 startup procedure.
2
Set to JOB# mode and enter the JOB#.
Pressing the numeric button on the right of
the JOB button displays the numeric keypad.
After entering the JOB#, press the Ent button.
When the barcode scanner is connected,
read the barcode.
3
Perform tracing.
Trace frames or patterns.
See “2.4 Tracing” (Page 30) for the tracing method.
See “2.10 Data control” (Page 80) when using registered shape data without tracing frames
or patterns.
Numeric buttons
• JOB# can be entered in any timing before blocking or saving the data.