Nidek Medical ICE-1000, Руководство оператора

Страница: 87 / 116

77
OPERATING PROCEDURES : Blocking
2
2.9.1 Blocking with frame change holder
Use the provided holder when the lens can not be held with the three pins on the lens table because
the lens diameter is small as for when lenses are being reused in different frames.
1) Press the F.C. button in the blocking
screen.
2) Pullout the lens pin on the lens table with
hands.
3) Place the frame change holder on the
center of the lens table.
The orientation of the frame change holder is
as shown to the right.
4) Place the lens on the frame change holder
and block it.
Block the lens while holding it by hand
without the lens clamp.
Lens pin
Frame change
holder
CAUTION
• When blocking, be sure not to touch blocking arm and lens cup to hold lens.
• When attaching the lens pin to the lens table, align the pin direction to insert.
When the direction is different, it is not possible to insert.