Nidek Medical ICE-1000, Руководство оператора

Страница: 63 / 116

53
OPERATING PROCEDURES : Setting Processing Conditions and Entering Layout Data
2
O Setting alignment scale
The height of the horizontally long ellipse and the spacing between the horizontal lines of the
alignment scale can be changed by the corresponding parameters.
Manual Mode scale: (A in the figure)
Select the spacing between horizontal lines: 0
mm, 1.0 mm, 2.0 mm, or 3.0 mm.
When 0 mm is selected, the horizontal lines are
not displayed
Alignment mark V size: (B in the figure)
Select the height of the alignment mark (hori-
zontally ling ellipse): 0 mm, 1.0 mm, or 2.0 mm.
When 0 mm is selected, the horizontal long
ellipse becomes a straight line.
• Automatic or manual alignment is the difference between the Mark mode for Single vision
lens and Manual.
For special-purpose lenses, the blocked cup position may become shifted despite exact alignment
on the screen due to the optical characteristics of these lenses. In such cases, compensate for the
decentering by shifting the lens off the center using on-screen scales as guidelines and then block
the lens.
Á
Â
Á
Â