Nidek Medical ICE-1000, Руководство оператора

Страница: 101 / 116

91
CONNECTION AND SETTINGS : Setting Parameters
4
5) Tracer: Inside, Outside
Factory setting: Inside
This parameter sets the tracer from which shape data is imported.
Ordinarily, never change the parameter setting from Inside. Outside is only for the ICE-
1000NT (without the tracing unit equipped). Setting the parameter to Outside disables the
operator from loading shape data from the built-in tracing unit.
6) Language: Japanese, English, French
Factory setting: English
This parameter sets the language displayed. Select from Japanese, English, or French.
7) Blocking counter: Numeric value
Factory setting: 0
This parameter shows the numbers of blocked lenses.
To clear the number of blocked lenses, select the Clear or Cancel button of the “Do you want
to clear a clocking counter?” message that is displayed by pressing the corresponding set-
ting button to the Blocking counter parameter.
[Parameter description: Parameter 2 screen]
8) Cup Mode: STD, Pliable, Mini, Nano
Factory setting: STD
This parameter sets the lens cup.
Selecting STD makes the following two functions available:
• The cup mark can be changed in shape by setting the Full eye minimum size, Minimum
edging H size and Minimum edging V size parameters.
• The cup mark is automatically switched between the standard cup mark and that for half-
eye lenses in accordance with lens layout data.
When Nano, Mini, or Pliable is selected, the displayed cup mark does not change in size. In
addition, the above three parameter settings do not take effect.