Nidek Medical ICE-1000, Руководство оператора

Страница: 60 / 116

50
OPERATING PROCEDURES : Setting Processing Conditions and Entering Layout Data
{ Semi auto mode
Enter lens layout data using the printed eye point for far vision on the lens.
The inclination of the lens is automatically compensated for with respect to the horizontal reference
lines. To block the lenses, manually align the lens using the eye point mark for far vision.
Before blocking the lenses, erase marks on the lens other than the printed eye point for far vision and
horizontal reference lines.
{ Mark mode
Enter lens layout data by specifying a desired eye point
for far vision by the height from the laser marks (EP).
Measure the EP value in advance:
1) Mark the laser marks with a pen.
2) Determine a desired eye point for far
vision, and measure the height from the
laser marks (EP).
The range of the EP value is 0.0 to + 6.0mm in
increments of 0.1mm.
The ICE-1000 automatically detects the marked laser marks of the lens and blocks the lens.
{ Entering lens layout data
1
Set the lens type to Progressive (progressive
power lens)
2
Enter the FPD (or DBL).
3
Enter the prescribed PD (or 1/2PD) at the PD
(or 1/2PD field).
4
Select a method to enter the optical center height.
Pressing the button displays the pop-up menu. Press the PD or BT button to
change the entry method.
EP
Laser mark
Laser mark