manualshive.com logo in svg

Motorola MPC8260 PowerQUICC II, Руководство пользователя

Motorola MPC8260 PowerQUICC II - мощный процессор, предназначенный для широкого спектра приложений. Скачайте бесплатное руководство пользователя на manualshive.com для более глубокого понимания функций и возможностей этого устройства. Не упустите шанс загрузить инструкцию и получить максимум от вашего продукта.

Поделиться
Скачать
background image

MOTOROLA

Chapter  6.  External Signals

  

6-9

Part III. The Hardware Interface

L_A15

SMI

PCI_FRAME

Local bus address 15ÑLocal bus address bit 15 output pin. In the local address bus bit 14 is most 
signiÞcant and bit 31 is least signiÞcant.
System management interruptÑSystem management interrupt input to the core.
PCI frameÑPCI cycle frame input output pin. Used by the current PCI master to indicate the 
beginning and duration of an access. Driven by the MPC8260 when its PCI interface is the master 
of the access. Otherwise, it is an input.

L_A16

PCI_TRDY

Local bus address 16ÑLocal bus address bit 16 output pin. In the local address bus bit 14 is most 
signiÞcant and bit 31 is least signiÞcant.
PCI target readyÑPCI target ready input/output pin. This pin is driven by the MPC8260 when its 
PCI interface is the target of a PCI transfer. Assertion of this pin indicates that the PCI target is 
ready to send or accept a data beat.

L_A17

PCI_IRDY 

CKSTOP_OUT

Local bus address 17ÑLocal bus address bit 17 output pin. In the local address bus bit 14 is most 
signiÞcant and bit 31 is least signiÞcant.
PCI initiator readyÑPCI initiator ready input/output pin. This pin is driven by the MPC8260 when its 
PCI interface is the initiator of a PCI transfer. Assertion of this pin indicates that the PCI initiator is 
ready to send or accept a data beat.
Checkstop outputÑ(Output) Assertion of CKSTOP_OUT indicates the core is in checkstop mode. 

L_A18

PCI_STOP

Local bus address 18ÑLocal bus address bit 18 output pin. In the local address bus bit 14 is most 
signiÞcant and bit 31 is least signiÞcant.
PCI stopÑPCI stop input/output pin. This pin is driven by the MPC8260 when its PCI interface is 
the target of a PCI transfer. Assertion of this pin indicates that the PCI target is requesting the 
master to stop the current PCI transfer.

L_A19

PCI_DEVSEL

Local bus address 19ÑLocal bus address bit 19 output pin. In the local address bus bit 14 is most 
signiÞcant and bit 31 is least signiÞcant.
PCI device selectÑPCI device select input/output pin. This pin is driven by the MPC8260 when its 
PCI interface has decoded the address as the target of the current PCI transfer. As an input, 
PCI_DEVSEL indicates whether any device on the PCI bus has been selected.

L_A20

PCI_IDSEL

Local bus address 20ÑLocal bus address bit 20 output pin. In the local address bus bit 14 is most 
signiÞcant and bit 31 is least signiÞcant.
PCI initialization device selectÑ(Input). Used to select MPC8260Õs PCI interface during a PCI 
conÞguration cycle.

L_A21

PCI_PERR

Local bus address 21ÑLocal bus address bit 21 output pin. In the local address bus bit 14 is most 
signiÞcant and bit 31 is least signiÞcant.
PCI parity errorÑPCI data parity error input/output pin. Assertion of this pin indicates that a data 
parity error was detected during a PCI transfer (except for a special cycle).

L_A22

PCI_SERR

Local bus address 22ÑLocal bus address bit 22 output pin. In the local address bus bit 14 is most 
signiÞcant and bit 31 is least signiÞcant.
PCI system errorÑPCI system error input/output pin. Assertion of this pin indicates that a PCI 
system error was detected during a PCI transfer. The PCI system error is for reporting address 
parity errors, data parity errors on a special cycle command, or other catastrophic system errors.

L_A23

PCI_REQ0

Local bus address 23ÑLocal bus address bit 23 output pin. In the local address bus bit 14 is most 
signiÞcant and bit 31 is least signiÞcant.
PCI arbiter request 0ÑPCI request 0 input/output pin. When MPC8260Õs internal PCI arbiter is 
used, this is an input pin. In this mode assertion of this pin indicates that an external PCI agent is 
requesting the PCI bus. When an external PCI arbiter is used, this is an output pin. In this mode 
assertion of this pin indicates that MPC8260Õs PCI interface is requesting the PCI bus.

Table 6-1. External Signals (Continued) 

Signal Description

Содержание MPC8260 PowerQUICC II















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MPC8260 PowerQUICC II

Ubiquiti M900 Quick Start Manual preview
M900
Бренд: Ubiquiti Страницы: 24
Abus TVVR36500 User Manual preview
TVVR36500
Бренд: Abus Страницы: 60
Patton electronics 1090 Service Manual preview
1090
Бренд: Patton electronics Страницы: 8
Fostex DE-1 Service Manual preview
DE-1
Бренд: Fostex Страницы: 20
ZALMAN CNPS6500B-AlCu User Manual preview
CNPS6500B-AlCu
Бренд: ZALMAN Страницы: 4
Enterasys Enterasys Matrix 2G4082-25 Hardware Installation Manual preview
Enterasys Matrix 2G4082-25
Бренд: Enterasys Страницы: 58
A4Tech RH-10 User Manual preview
RH-10
Бренд: A4Tech Страницы: 8
PaloAlto Networks ION 1000 Hardware Reference Manual preview
ION 1000
Бренд: PaloAlto Networks Страницы: 28
Areca ARC-12x4 Series Quick Installation Manual preview
ARC-12x4 Series
Бренд: Areca Страницы: 2
Amphenol C2LINX Series Installation Manual preview
C2LINX Series
Бренд: Amphenol Страницы: 43
El.Mo 090010932 User Manual preview
090010932
Бренд: El.Mo Страницы: 16
ZALMAN CNPS10X Flex User Manual preview
CNPS10X Flex
Бренд: ZALMAN Страницы: 12
A4Tech G6 Saver User Manual preview
G6 Saver
Бренд: A4Tech Страницы: 8
Sony Ericsson GC86 Quick Start Manual preview
GC86
Бренд: Sony Ericsson Страницы: 2
JETWAY FDF13 Series Quick Installation Manual preview
FDF13 Series
Бренд: JETWAY Страницы: 15
Compaq ProLiant 4500 Quick Start Manual preview
ProLiant 4500
Бренд: Compaq Страницы: 2
Motorola MC68VZ328 User Manual preview
MC68VZ328
Бренд: Motorola Страницы: 376
Motorola MC68341 User Manual preview
MC68341
Бренд: Motorola Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды