Mitsubishi 13J851, Руководство пользователя

Страница: 26 / 270

13
3.1.7 Noise filter (power supply line filter)
A noise filter is effective for suppressing conduction noise. For stand-alone
systems (redundant power supply) and redundant CPU systems of the Q4ARCPU,
noise filters must be installed on the power supply line. For stand-alone systems
(single power supply) of the Q4ARCPU, noise filters are not necessarily installed
on the power supply line except for the A61PEU, A62PEU, and A63P, while
installing noise filters can reduce more noises. (A noise filter is effective for
suppressing conductive noise in the band of approximately 10MHz or less.). Use
any of the following noise filters (double type filters) or equivalent.
Model name FN343-3/01 FN660-6/06 ZHC2203-11 MBW1205
Manufacturer SCHAFFNER SCHAFFNER TDK Nemic Lambda
Rated current 3A 6A 3A 5A
Rated voltage 250V
The precautions when attaching a noise filter are described below.
(1) Do not install the input and output cables of the noise filter together to
prevent the input noise inducting into the output cable.
Filter
Input side
(power supply side)
Induction
Output side
(device side)
Filter
Input side
(power supply side)
Output side
(device side)
Induction
(a) Installing the input and output
cables together will cause
noise induction.
(b) Separate the input cable from
the output cable.
(2) Connect the noise filter’s ground terminal to the control panel with the
shortest cable as possible (approx. 10cm (3.94 in.) or less.)