Mitsubishi 13J851, Руководство пользователя

Страница: 171 / 270

158
2401
Program memory capacity was
exceeded by performing boot operation
or automatic write to standard ROM.
• Check and correct the parameters
(boot setting).
• Delete unnecessary files in the
program memory.
• Choose "Clear program memory" for
boot in the parameter so that boot is
started after the program memory is
cleared.
Qn(H)
*3
QnPH
QnPRH
Program memory capacity was
exceeded by performing boot operation.
QnU
The file specified by parameters cannot
be made.
• Read the individual information of the
error using the peripheral device,
check to be sure that the parameter
drive name and file name correspond
to the numerical values there
(parameter number), and correct.
• Check the space remaining in the
memory card.
Although setting is made to use the
device data storage file, there is no
empty capacity required for creating the
device data storage file in the standard
ROM.
Secure the empty capacity of the
standard ROM.
QnU
2402
Though the file register has been set in
the pairing setting/tracking setting, the
file register does not exist.
Confirm the file register and parameter. Q4AR
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*3 The function version is B or later.
*4 The function version is A.
*5 The module whose first 5 digits of serial No. is 04101 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.