Mitsubishi 13J851, Руководство пользователя

Страница: 211 / 270

198
4102
In a multiple CPU system, the link direct
device (J \ ) was specified for the
network module under control of
another station.
• Delete from the program the link
direct device which specifies the
network module under control of
another CPU.
• Using the link direct device, specify
the network module under control of
the host CPU.
Q00/Q01
*2
Qn(H)
*2
QnPH
QnU
• The network No. or station No.
specified for the dedicated instruction
is wrong.
• The link direct device (J \ ) setting
is incorrect.
• The module No./ network No./number
of character strings exceeds the
range that can be specified.
Read the common information of the
error using the peripheral device, check
error step corresponding to its
numerical value (program error
location), and correct the problem.
Rem
• The specification of character string
(" ") specified by dedicated instruction
cannot be used for the character
string.
QnU
4103
The configuration of the PID dedicated
instruction is incorrect.
QnA
Q00J/Q00/
Q01
*2
Qn(H)
QnPRH
QnU
4104
The number of settings is beyond the
range.
Read the common information of the
error using peripheral device, and check
and correct the program corresponding
to that value (program error location).
Q4AR
4105
PLOADP/PUNLOADP/PSWAPP
instructins were executed while setting
program memory check.
• Delete the program memory check
setting.
• When using the program memory
check, delete PLOADP/PUNLOADP/
PSWAPP instructions.
QnPH
*5
4107
33 or more multiple CPU dedicated
instructions were executed from one
CPU module.
Using the multiple CPU dedicated
instruction completion bit, provide
interlocks to prevent one CPU module
from executing 33 or more multiple CPU
dedicated instructions.
Q00/Q01
*2
Qn(H)
*2
QnPH
Q02U
Numbers of execution to the CC-Link
instruction are beyond 32. Set the numbers of execution to the
CC-Link instruction to 32 or less.
QnA
4108
The CC-Link parameter is not set when
the CC-Link instruction is executed. Execute the CC-Link instruction after
setting the CC-Link parameter.
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*3 The module whose first 5 digits of serial No. is 04012 or later.
*4 The module whose first 5 digits of serial No. is 07012 or later.
*5 The module whose first 5 digits of serial No. is 07032 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.