Mitsubishi 13J851, Руководство пользователя

Страница: 175 / 270

162
2500
• There is a program file that uses a
device that is out of the range set in
the PLC parameter device setting.
• After the PLC parameter setting is
changed, only the parameter is
written into the PLC.
• Read the common information of the
error using the peripheral device,
check to be sure that the parameter
device allocation setting and the
program file device allocation
correspond to the numerical values
there (file name), and correct if
necessary.
• If PLC parameter device setting is
changed, batch-write the parameter
and program file into the PLC.
After the index modification of the PLC
parameter is changed, only the
parameter is written to the PLC.
When the index modification of the PLC
parameter is changed, batch-write the
parameter and program file into the
PLC.
QnU
2501
There are multiple program files
although "none" has been set at the
PLC parameter program settings. Edit the PLC parameter program setting
to "yes". Alternatively, delete unneeded
programs.
QnA
Qn(H)
QnPH
QnPRH
QnU
• There are three or more program
files.
• The program name differs from the
program contents.
• Delete unnecessary program files.
• Match the program name with the
program contents.
Q00J/Q00/Q01
2502
The program file is incorrect.
Alternatively, the file contents are not
those of a sequence program.
Check whether the program version
is
.QPG, and check the file
contents to be sure they are for a
sequence program.
The program file is not the one for the
redundant CPU.
Create a program using GX Developer
or PX Developer for which the PLC type
has been set to the redundant CPU
(Q12PRH/Q25PRH), and write it to the
CPU module.
QnPRH
2503 There are no program files at all.
• Check program configuration.
• Check parameters and program
configuration.
2504
Two or more SFC normal programs or
control programs have been
designated.
QnA
Qn(H)
QnPH
QnPRH
QnU
There are two or more SFC programs. Reduce the SFC programs to one.
Q00J/Q00/
Q01
*3
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*3 The function version is B or later.
*4 The function version is A.
*5 The module whose first 5 digits of serial No. is 04101 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.