Mitsubishi 13J851, Руководство пользователя

Страница: 259 / 270

246
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
7000
• In the operating mode of a multiple
CPU system, a CPU error occurred at
the CPU where "All station stop by
stop error of CPU " was selected.
• In a multiple CPU system, a CPU
module incompatible with the multiple
CPU system was mounted.
• Read the individual information of the
error using the GX Developer, check
the error of the PLC resulting in CPU
module fault, and remove the error.
• Remove the CPU module
incompatible with the multiple CPU
system from the main base unit.
Q00/Q01
*1
Qn(H)
*1
QnPH
QnU
In a multiple CPU system, CPU other
than CPU No.1 cannot be started up
due to stop error of the CPU No.1 at
power-on, which occurs to CPU No.2 to
No.4.
Read the individual information of the
error using the GX Developer, check the
error of the PLC resulting in CPU
module fault, and remove the error. Q00/Q01
*1
Qn(H)
*1
QnPH
QnU
7002
• There is no response from the target
CPU module in a multiple CPU
system during initial communication.
• In a multiple CPU system, a CPU
module incompatible with the multiple
CPU system was mounted.
• Reset the CPU module and RUN it
again. If the same error is displayed
again, this suggests the hardware
fault of any of the CPU modules.
(Contact your local Mitsubishi
representative.)
• Remove the CPU module
incompatible with the multiple CPU
system from the main base unit. Or,
replace the CPU module
incompatible with the multiple CPU
system with the compatible one.
Q00/Q01
*1
Qn(H)
*1
QnPH
• There is no response from the target
CPU module in a multiple CPU
system during initial communication.
• Reset the CPU module and RUN it
again. If the same error is displayed
again, this suggests the hardware
fault of any of the CPU modules.
(Contact your local Mitsubishi
representative.)
QnU
7003
There is no response from the target
CPU module in a multiple CPU system
at initial communication stage.
Reset the CPU module and RUN it
again. If the same error is displayed
again, this suggests the hardware fault
of any of the CPU modules. (Contact
your local Mitsubishi representative.)
Q00/Q01
*1
Qn(H)
*1
QnPH
*3 The Universal model QCPU except the Q02UCPU.