Mitsubishi 13J851, Руководство пользователя

Страница: 181 / 270

168
3005
The contents of the parameter are
broken.
• Read the individual information of the
error using the peripheral device,
check the parameter item
corresponding to the numerical value
(parameter No.), and correct it.
• Write the modified parameter items to
the CPU module again, and power-on
the PLC or reset the CPU module.
• When the same error occurs again,
the hardware is faulty. Contact your
local Mitsubishi representative,
explaining a detailed description of
the problem.
Qn(H)
*6
3006
• The high speed interrupt is set in a
Q02CPU.
• The high speed interrupt is set in a
multiple CPU system.
• The high speed interrupt is set when
aQA1S6 B or QA6 B is used.
• No module is installed at the I/O
address designated by the high
speed interrupt.
• Delete the setting of the Q02CPU' s
high speed interrupt. To use high
speed interrupts, change the CPU
module to one of the Q02H/Q06H/
Q12H/Q25HCPU.
• To use a multiple CPU system, delete
the setting of the high-speed
interrupt. To use high speed
interrupts, change the system to a
single CPU system.
• To use either the QA1S6 B or
QA6 B, delete the setting of the high
speed interrupt. To use high speed
interrupts, do not use the QA1S6 B/
QA6 B.
• Re-examine the I/O address
designated by the high speed
interrupt setting.
Qn(H)
*3
3007
The parameter file in the drive specified
as valid parameter drive by the DIP
switches is inapplicable for the CPU
module. Create parameters using GX
Developer, and write them to the drive
specified as valid parameter drive by
the DIP switches.
QnPRH
3009
In a multiple CPU system, the modules
for AnS, A, Q2AS and QnA have been
set to multiple control CPUs.
Re-set the parameter I/O assignment to
control them under one CPU module.
(Change the parameters of all CPUs in
the multiple CPU system.)
Qn(H)
*1
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*3 The module whose first 5 digits of serial No. is 04012 or later.
*4 The module whose first 5 digits of serial No. is 07032 or later.
*5 The MELSECNET/H module whose first 5 digits of serial No. is 08102 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.