Mitsubishi 13J851, Руководство пользователя

Страница: 209 / 270

196
4100
The instruction cannot process the
contained data.
Read the common information of the
error using the peripheral device, check
error step corresponding to its
numerical value (program error
location), and correct the problem.
Rem
Access error of ATA card occurs by
FREAD/FWRITE instructions.
• Take measurements against noise.
• Reset and restart the CPU module.
When the same error is displayed
again, the ATA card has hardware
failure.
(Please consult your local Mitsubishi
service center or representative,
explaining a detailed description of
the problem.)
Qn(H)
QnPH
QnPRH
4101
• The number of setting data dealt with
the instruction exceeds the applicable
range.
• The storage data and constant of the
device specified by the instruction
exceeds the applicable range.
• When writing to the host CPU shared
memory, the write prohibited area is
specified for the write destination
address.
• The range of storage data of the
device specified by the instruction is
duplicated.
• The device specified by the
instruction exceeds the range of the
number of device points.
• The interrupt pointer No. specified by
the instruction exceeds the applicable
range.
Read the common information of the
error using the peripheral device, check
error step corresponding to its
numerical value (program error
location), and correct the problem.
Rem
• The storage data of file register
specified by the instruction exceeds
the applicable range. Or, file register
is not set.
QnU
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*3 The module whose first 5 digits of serial No. is 04012 or later.
*4 The module whose first 5 digits of serial No. is 07012 or later.
*5 The module whose first 5 digits of serial No. is 07032 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.