Mitsubishi 13J851, Руководство пользователя

Страница: 157 / 270

144
2114
An instruction, which on execution
specifies other stations, has been used
for specifying the host CPU. (An
instruction that does not allow the host
CPU to be specified).
Read the individual information of the
error using the GX Developer, check the
program corresponding that value
(program error location), and make
correction.
Q00J/Q00/
Q01
*3
Qn(H)
*3
QnPH
QnU
2115
An instruction, which on execution
specifies the host CPU, has been used
for specifying other CPUs. (An
instruction that does not allow other
stations to be specified).
Q00J/Q00/
Q01
*3
Qn(H)
*3
QnPH
2116
• An instruction that does not allow the
.under the control of another CPU to
be specified is being used for a
similar task.
• Instruction was executed for the A or
QnA module under control of another
CPU.
Q00J/Q00/
Q01
*3
Qn(H)
*3
QnPH
QnU
2117
A CPU module that cannot be specified
in the instruction dedicated to the
multiple CPU system was specified.
Q00J/Q00/
Q01
*3
Qn(H)
*3
QnPH
QnU
2118
When the online module change setting
is set to be “enabled” in the PLC
parameter in a multiple CPU system,
intelligent function module controlled by
other CPU using the FROM instruction/
intelligent function module device
(U \G ) is specified.
• When performing the online module
change in a multiple CPU system,
correct the program so that access
will not be made to the intelligent
function module controlled by the
other CPU.
• When accessing the intelligent
function module controlled by the
other CPU in a multiple CPU system,
set the online module change setting
to be “disabled” by parameter.
Qn(H)
*3
QnPH
QnU
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*3 The function version is B or later.
*4 The function version is A.
*5 The module whose first 5 digits of serial No. is 04101 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.