Mitsubishi 13J851, Руководство пользователя

Страница: 185 / 270

172
3014
• In a multiple CPU system, the online
module change parameter (multiple
CPU system parameter) settings
differ from those of the reference
CPU.
• In a multiple CPU system, the online
module change setting is enabled
although the CPU module mounted
does not support online module
chang parameter.
• Match the online module change
parameter with that of the reference
CPU.
• If the CPU module that does not
support online module change is
mounted, replace it with the CPU
module that supports online module
change.
Qn(H)
QnPH
QnU
3015
In a multiple CPU system configuration,
the CPU verified is different from the
one set in the parameter setting.
Read the individual information of the
error using the peripheral device, check
the parameter item corresponding to the
numerical value (parameter No./CPU
No.) and parameter of target CPU, and
correct them.
QnU
3016
The CPU module incompatible with
multiple CPU synchronized boot-up is
set as the target for the synchronized
boot-up in the [Multiple CPU
synchronous startup setting].
Delete the CPU module incompatible
with multiple CPU synchronized boot-up
from the setting.
QnU
*7
3040 The parameter file is damaged.
With GX Developer, write [PLC
parameter/netwark parameter/remote
password] to a valid drive then reload
the power supply for system and/or
reset the CPU module. If the same
error occurs, it is thought to be
hardware error. (Contact your local
Mitsubishi representative.)
Qn(H)
*4
QnPH
*4
QnPRH
*4
3041
Parameter file of intelligent function
module is damaged.
With GX Developer, write [Intelligent
function module parameter] to a valid
drive to write the parameters then
reload the power supply for system and/
or reset the CPU module. If the same
error occurs, it is thought to be a
hardware error. (Contact your local
Mitsubishi representative.)
Qn(H)
*4
QnPH
*4
QnPRH
*4
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*3 The module whose first 5 digits of serial No. is 04012 or later.
*4 The module whose first 5 digits of serial No. is 07032 or later.
*5 The MELSECNET/H module whose first 5 digits of serial No. is 08102 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.