Mitsubishi Electric FR-A700 EC, Инструкция по эксплуатации

Страница: 660 / 826

Communication operation and setting Parameter
6 - 480
The signal within parentheses is the initial setting. The description changes depending on
the setting of Pr. 180 to Pr. 189 "Input terminal function selection". (Refer to section 6.14.1.)
Each assigned signal is valid or invalid depending on NET. (Refer to section 6.22.3.)
The signal within parentheses is the initial setting. The description changes depending on
the setting of Pr. 190 to Pr. 196 "Output terminal function selection". (Refer to section 6.14.5.)
The restrictions depending on the operation mode changes according to the computer link spec-
ifications.
Bit
Definition
Control input instruction Inverter status
0 Stop command
RUN (inverter running)
1 Forward rotation command Forward rotation
2 Reverse rotation command Reverse rotation
3
RH (high speed operation command) SU (up to frequency)
4
RM (middle speed operation command) OL (overload)
5
RL (low speed operation command) IPF (instantaneous power failure)
6
JOG (Jog operation) FU (frequency detection)
7
RT (second function selection) ABC1 (alarm)
8
AU (current input selection) ABC2 (–)
9
CS (selection of automatic restart after instantane-
ous power failure)
0
10
MRS (output stop)
0
11
STOP (start self-holding)
0
12
RES (reset)
0
13 0 0
14 0 0
15 0 Alarm
Tab. 6-161: Inverter status/control input instruction
Operation Mode Read Value Written Value
EXT H0000 H0010
PU H0001 —
EXT JOG H0002 —
NET H0004 H0014
PU + EXT H0005 —
Tab. 6-162: Operation mode/inverter setting