Mitsubishi Electric FR-A700 EC, Инструкция по эксплуатации

Страница: 615 / 826

Parameter Selection of operation mode and operation location
FR-A700 EC 6 - 435
Explanation of table:
External: Operation is valid only from external terminal signal.
NET: Control only from communication is valid.
Combined: Operation is valid from either of external terminal and communication.
—: Operation is invalid from either of external terminal and communication.
Compensation: Control by signal from external terminal is only valid when
Pr. 28 "Multi-speed input compensation selection" = 1
Operation
Location
Selection
Communication operation com-
mand source (Pr. 338)
0: NET 1: External
Remarks
Communication speed command
source (Pr.339)
0: NET
1:
Exter-
nal 2:
Exter-
nal
0: NET
1:
Exter-
nal 2:
Exter-
nal
Selectiv
e function
Pr
. 178 to Pr
. 189 setting
20 X20
S-pattern acceleration/decel-
eration C switchover
NET External
22 X22 Orientation command
23 LX Pre-excitation
24 MRS
Output stop Combined External Pr. 79
≠
7
PU operation interlock
External
Pr. 79 = 7
When X12 signal is
not assigned
25 STOP Start self-holding selection — External
26 MC Control mode swichover
NET External
27 TL Torque limit selection
28 X28
Start-time tuning start exter-
nal input
37 X37 Traverse function selection
42 X42 Torque bias selection 1
43 X43 Torque bias selection 2
44 X44 P/PI control switchover
50 SQ Sequence start
60 STF Forward rotation command
61 STR Reverse rotation command
62 RES Reset External
63 PTC PTC thermistor input External
64 X64 PID forward action switchover NET External NET External
65 X65 PU-NET operation switchover
External
66 X66
External-NET operation
switchover
67 X67 Command source switchover
68 NP
Conditional position pulse
train sign
69 CLR
Conditional position droop
pulse clear
70 X70
DC feeding operation
permission
NET External
71 X71 DC feeding operation cancel
Tab. 6-128: Writing operation and speed commands (2)
NOTE The control source of communication is as set in Pr. 550 and Pr. 551.