Minebea Intec CSD-918 Series, Руководство по эксплуатации

Страница: 198 / 240

Check the analog output
↓
Is wiring correct? → No →
↓
Yes
↓
Connect wires surely (refer to
Chapter 17.1.3 ).
Voltage output load resistance is
5 k
Ω
or more. Current output load
resistance is 510
Ω
or less.
→ No → Apply the load resistance suitable
for the speciications.
↓
Yes
↓
Conirm the setting concerning the
analog output.
↓
Set correctly. → No →
↓
Yes
↓
Set correctly (refer to Chapter 17.1 ).
Inform Minebea Intec about the
contents of failure and situation in
details.
Check BCD output
↓
Is wiring correct? → No →
↓
Yes
↓
Connect wires surely with external
equipment (refer to Chap-
ter 17.2.3 ).
Except for the BCD are outputted. → Yes →
↓
No
↓
Match the setting concerning the
BCD output to the speciication of
external equipment connected (re-
fer to Chapter 17.2.3 ).
The intended value is not output. → Yes →
↓
No
↓
Select the target of BCD output (re-
fer to Chapter 17.2.3 ).
BCD output does not change. → Yes → Set the HOLD input opened.
↓
No
↓
Inform Minebea Intec about the
contents of failure and situation in
details.
Weight Controller CSD-918 19 Troubleshooting
EN-196 Minebea Intec