4 I/O setting screen
F1 to F4 and the external control I/O can be set on this screen.
5 WEIGHING OPERATION setting screen
The weighing operation such as weighing mode and control mode, etc., can be set
on this screen.
6 SEQUENCE CONTROL setting screen
The variety of items in the sequential mode can be set on this screen.
7
CALIBRATION screen
The load calibration is executed to display the electrical signal from the weighing
device (load cell) as an accurate load on this screen.
8 SERVO CALIBRATION screen
The controls of a servo ampliier and a gate can be set on this screen.
9 BUILT-IN SERIAL I/F setting screen
The details of standard RS-485 interface and 2-pin method serial interface can be
set on this screen.
10 SYSTEM setting screen
The time of back light of, the data storage and memory clearing, etc., can be set on
this screen.
11 OPTION setting screen
The details of the various options can be set on this screen.
12 Operation checking screen
The operation of this unit and the various options can be checked on this screen.
5.4 The common setting method of each screen
The setting method of each item is executed as follows.
5.4.1
Setting method by selections
(example: set the display rate to 4 times/s.)
1
3
2
Display section of input confirmation
[4 TIMES/s] in this case.
1. Press on the key (1) which you want to select.
2. Check that the selected content is relected on the display section of input
conirmation (2).
3. Tap [OK] (3) to execute the registration.
5 Operations
Weight Controller CSD-918
Minebea Intec
EN-37
Содержание CSD-918 Series
Страница 239: ......