Minebea Intec CSD-918 Series, Руководство по эксплуатации

Страница: 197 / 240

Check the serial interface Com-
munication
↓
Is wiring correct? → No →
↓
Yes
↓
Connect wires surely with external
equipment (refer to Chapter 4.7 ).
Communication protocol is correc-
tly set.
→ No →
↓
Yes
↓
Set correctly (refer to Chapter 15.2 ).
Target of print signal operation is
correctly set.
→ No →
↓
Yes
↓
Use correct command/data (refer
to Chapter 17.5 ).
Inform Minebea Intec about the
contents of failure and situation in
details.
Check on options
↓
Analog output operation is wrong. → Yes → Check the analog output.
↓
No
↓
The BCD output is wrong. → Yes → Check the BCD output.
↓
No
↓
RS-232C is wrong. → Yes → Check the RS-232C interface.
↓
No
↓
RS-422 is wrong. → Yes → Check the RS-422.
↓
No
↓
RS-485 is wrong. → Yes → Check the RS-485.
↓
No
↓
Inform Minebea Intec about the
contents of failure and situation in
details.
19 Troubleshooting Weight Controller CSD-918
Minebea Intec EN-195