-
Line display check
By tapping [CHECK OF LINE DISP.], the screen displays the vertical line and the
horizontal line, and the display in line can be checked.
-
Touch panel check
By tapping [CHECK OF TOUCH PANEL], the switches are appeared in lower right,
lower left, upper right, upper left and center.
That sign changes to yellow when you tap and the operation of touch panel can be
checked.
13.4 I/O check (CHECK OF I/O)
The external control I/O can be checked.
Please conirm if the key that set when external control input is actually input is turned
on.
Please conirm if the destined output is worked when the external control output is
changed as ON and OFF in the touch panel from OUT1 to OUT11.
13.5 Monitor mode (MONITOR)
In the Monitor mode, the applied load on strain gage applied transducer at present is
displayed with the converted unit of mV/V.
Note:
-
The display value in Monitor mode is a reference value. The accuracy of display is
0.5 % approximately.
-
In Monitor mode, the range which can be monitored is from -3.1 mV/V to 3.1 mV/V
approximately.
13.6 Check of BCD output (BCD)
The BCD I/O can be checked. The operation at destined unit can be checked when the
keys from A1 to A17 and from B1 to B17 changes as ON and OFF.
Also, the input at B18 can be checked. Please check that the key turns on by the actual
input.
Note:
When two sets of BCD output are equipped with, both of two sets are the same
operation. For example, when A1 is turned on, two A1 output is turned on.
13 Operational check function (CHECK
Weight Controller CSD-918
Minebea Intec
EN-129
Содержание CSD-918 Series
Страница 239: ......