Minebea Intec CSD-918 Series, Руководство по эксплуатации

Страница: 50 / 240

Weight value
Error
SPAN
Weight value
0 0
SPAN
Compensation point 3
Compensation point 2
Compensation point 1
After linearization Before linearization
Display Display
Note:
-
Please set the weight value by which you are going to compensate as
COMPENSATION POINT 1 < COMPENSATION POINT 2 < COMPENSATION POINT 3.
- The compensation of linearization more than max. load (Max) is not accepted.
- When digital linearization clear is executed, all of the compensated value of
linearization becomes clear.
6.6.1 Switch to digital linearize screen
You can switch from weighing screen to digital linearization screen by the following
operations.
6.6.2 Setting method of digital linearization
Please conirm that the input value is relected on the input conirmation display
section.
Digital linearization is inished when the screen is switched to digital linearization
screen.
6.6.3 Clearing method of digital linearization
1. Select [MENU].
2. Select [CALIBRATION] on menu screen 1/2.
3. Tap [NEXT] on weighing calibration screen 1/2.
4. Tap [DIGITAL LINEARIZE] on weighing calibration screen 2/2.
1. Select [LINEARIZE COMPENSATION 1] on digital linearization screen.
2. Put the weight of the point that you want to compensate on weighing section.
3. Input the same numerical value as the weight value applied on the load cell with ten
keys.
4. Tap [OK].
5. Please process the same operation as the above mentioned for the setting of
compensation point 2 and compensation point 3.
1. Select [LINEARIZE CLEAR] on digital linearization screen.
2. Select [EFFECTIVE] and then tap [OK].
Weight Controller CSD-918 6 Calibration
EN-48 Minebea Intec