Minebea Intec CSD-918 Series, Руководство по эксплуатации

Страница: 174 / 240

Item name Command name Command Number
I/O output 9 72 39
I/O output 10 72 40
I/O output 11 72 41
Return command setting
1:OFF; 2: STABLE; 3: ZERO BAND; 4: FULL; 5: F. FLOW; 6: M. (Middle) FLOW; 7:
D. (Fine) FLOW; 8: OVER; 9: OK; 10: UNDER; 11: MIXING; 12: DISCHARGE (GATE
OPEN); 13: INFLOW FINISH; 15: DISCHARGE FINISH; 16: MIXING FINISH; 17:
NOZZLE DOWN (INSERT); 18: DURING MEASUREMENT; 19: MEASUREMENT
SEQUENCE ERROR; 20: CAP. EXCEEDED ERROR; 21: ERROR; 22: DURING TA-
RE WEIGHT; 23: CENTER OF ZERO; 24: GROSS WEIGHT DISPLAY; 25: NET
WEIGHT DISPLAY; 26: DURING HOLD; 77: SERVO ERROR
Command name Command Number Command name
I/O output logic (OUT1 ~ OUT7) 72 61 1: [Negative logic]; 2: [Positive
logic]; 100: I/O OUTPUT1; 101: I/
O OUTPUT2; 103: I/O OUTPUT3;
104: I/O OUTPUT4; 105: I/O
OUTPUT5; 106: I/O OUTPUT6;
107: I/O OUTPUT7
I/O output logic (OUT8 ~ OUT11) 72 62 1: [Negative logic]; 2: [Positive
logic]; 100: I/O OUTPUT 8; 101:
I/O OUTPUT 9; 103: I/O OUTPUT
10; 104: I/O OUTPUT 11
Read out commands
Item name Command name Com-
mand
Number Return command setting value
Zero key lock 72 51 1: EFFECTIVE; 2: INVALID
Gross/Net weight key lock 72 52 1: EFFECTIVE; 2: INVALID
Tara key lock 72 53 1: EFFECTIVE; 2: INVALID
Brand code key lock 72 54 1: EFFECTIVE; 2: INVALID
F key lock 72 55 1: EFFECTIVE; 2: INVALID
Menu key lock 72 56 1: EFFECTIVE; 2: INVALID
Calibration key lock 72 57 1: EFFECTIVE; 2: INVALID
I/O setting
Servo CALIB. key lock 72 58 1: EFFECTIVE; 2: INVALID
Control mode 73 02 1: Inlow mode; 2: Discharge mode; 3: Ex-
ternal input change
I/O setting
Comparison signal opera-
tion (Operation of Over,
OK and Under)
73 03 1: ANY TIME; 2: STABLE; 3: SYNC with inlow
inish; 4: HOLD at inlow inish
Weight Controller CSD-918 17 Options
EN-172 Minebea Intec