Mindray iPM-9800, Руководство оператора

Страница: 96 / 300

8-18
8.7.2 Switching Arrhythmia Analysis On and Off
To switch arrhythmia analysis on or off:
1. Select the ECG parameter window and then select [
Arrh. Analysis >>
] from the
popup menu.
2. Select [
Arrh. Analysis
] to toggle between [
On
] and [
Off
].
When arrhythmia analysis is turned off, the PVC numeric will not be displayed.
8.7.3 Changing Arrhythmia Alarm Settings
To change arrhythmia alarm settings, select the ECG parameter area and then select [
Arrh.
Analysis >>
]. In the [
Arrh. Analysis
] menu, you can:
„ switch on or off the alarm for PVCs by selecting [
PVCs
] and then toggling between
[
On
] and [
Off
].
„ set the alarm level, alarm record, and alarm limit for PVCs by selecting [
Alm Lev
],
[
Alm Rec
] and [
PVCs High
] respectively and then selecting the appropriate settings.
„ select [Arrh. Alarm Setup >>] to change alarm settings for individual arrhythmia
events. For Mortara algorithm, Asystole, Vfib and Vtac are exclusively high-level
alarms and their alarm level is unchangeable. Furthermore, these alarms will be
triggered only if their alarm conditions are active, regardless of whether arrhythmia
analysis is switched on.
8.7.4 Changing Arrhythmia Threshold Settings (For Mortara
Only)
Select the ECG parameter window → [Arrh. Analysis >>] → [Arrh. Threshold Setup], and
you can then change threshold settings for some arrhythmia alarms. In case an arrhythmia
violates its threshold, an alarm will be triggered. The asystole delay time relates to
arrhythmia relearning. When HR is less than 30 bpm, it is recommended to set the asystole
delay time to 10 seconds.
PVC numeric