Mindray iPM-9800, Руководство оператора

Страница: 48 / 300

4-4
2. In the popup [
Transfer Patient Data
] menu, you can:
‹ Select [
Transfer Patient
] to transfer the patient data to the monitor, or
‹
Select [
Cancel Transfer
] to cancel the operation of transferring patient data. Then
the patient data to be transferred becomes archived patient data. The current patient
data starts to be saved in the card.
‹
Select [
Unload CF Storage Card
] to not transfer the patient data and to unload the
card. The current patient data will not be saved in the card.
3. When you select [Transfer Patient], the monitor compares the patient information stored
in both the CF storage card and the monitor and deals with the patient data based on the
following.
‹ Different
Patients:
The monitor erases all the current patient data, transfers the patient
data from the CF storage card, and loads the configuration according
to the patient category.
‹
Same
Patient:
In the popup dialog box, you can:
Select [
Yes
] to merge the patient data in the monitor and CF storage
card.
Select [
No
] to erase all the current patient data in the monitor and to
transfer the patient data from the CF storage card.
Please notice that only the patient data in the past specified number of hours can be
transferred from the CF storage card. The number of hours is called [
Transferred Data
Length
] and can be specified in the configuration mode. If the latest patient data stored on
the card has a time stamp newer than the time displayed on the receiving monitor, data
transfer will be prohibited.
WARNING
z
After a patient is successfully transferred, check if the patient settings (especially
patient category, paced status and alarm limits settings, etc.) on the monitor are
appropriate for this patient.