Mindray iPM-9800, Руководство оператора

Страница: 151 / 300

16-5
16.3 Changing CO
2
Settings
16.3.1 Entering the Standby Mode
The standby mode of the CO
2
module relates to the standby mode of the monitor as follows:
„ If the monitor enters the standby mode, the CO
2
module will also enter the standby
mode.
„ If the monitor exits the standby mode, the CO
2
module will also exit the standby mode.
„ If the CO
2
module enters or exits the standby mode, it will not affect the monitor.
To enter or exit the standby mode manually, select [
Operating Mode
] in the [
CO
2
Setup
]
menu and toggle between [
Standby
] and [
Measure
].
For the microstream CO
2
module, you can set a period of time after which the CO
2
module
enters the standby mode if no breath is detected since the CO
2
module is powered on or the
CO
2
module switches to the measure mode or the automatic standby time is re-set. To set the
standby time, in the [
CO
2
Setup
] menu, select [
Auto Standby (min)
] and then select the
appropriate setting.
16.3.2 Setting the Pressure Unit
In the [
CO
2
Setup
] menu, select [
Press. Unit
] and toggle between [
mmHg
], [
%
] and [
kPa
].
16.3.3 Setting up Gas Compensations
WARNING
z
Make sure that the appropriate compensations are used. Inappropriate
compensations may cause inaccurate measurement values and result in
misdiagnosis.
For the sidestream CO
2
module:
1. Select [
CO
2
Setup
].
2. According to the actual condition, set the concentration required for the following
compensations:
‹ [
O
2
Compen
]
‹
[
N
2
O Compen
]
‹ [
Des Compen
]