Mindray iPM-9800, Руководство оператора

Страница: 64 / 300

6-6
6.4 Viewing Other Patients
6.4.1 Care Group
If your patient monitor is connected to a central monitoring system, you can select up to 8
bedside monitors into a Care Group. This lets you:
„ View information on the monitor screen from another bed in the same Care Group.
„ Be notified of physiological and technical alarm conditions at the other beds in the
same Care Group.
To have a Care Group:
1. Select [
Screens
] QuickKey or select [
Screen Layout >>
] in the main menu. Then,
select [
Others
] and [
Ok
] from the popup menu.
2. In the [
View Other Patient
] window, select the care group setup button.
3. Select the desired bedside monitors from the [
Connected Monitor List
], and then
select the [
Exit
] button.
6.4.2 Viewing the Care Group Overview Bar
The Care Group overview bar locates at the bottom of the [
View Other Patient
] window. In
the overview bar, the department and bed label for any Care Group beds are displayed. The
color in which a Care Group bed appears matches its status:
„ Red: indicates the bed is giving high-level physiological alarms.
„ Yellow: indicates the bed is giving medium- or low-level physiological alarms, or
medium-level technical alarms.
„
Blue: indicates the bed is giving low-level technical alarms.
„ Grey: indicates the bed fails to be networked (bright grey) or stays in the standby mode
(dark grey).
„ Black: indicates the bed is networked but gives no alarms.
When multiple alarms occur to a Care Group bed, the Care Group bed appears in the color
that matches the highest level alarm.
You can view a Care Group bed’s alarms by selecting it from the care group, and as well
you can select the [
View This Patient
] button to view this bed in the [
View Other Patient
]
window.
For more details about Care Group alarms, refer to the
Alarms
chapter.